H3C MSR Series Command Reference

601
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the IPv4 or IPv6
address belongs. The vpn-instance-name argument represents the VPN instance name, a
case-sensitive string of 1 to 31 characters. To specify an IP address on the public network, do not
specify this option.
Usage guidelines
Use this command to specify which address or interface can use the IKE keychain for IKE
negotiation. Specify the local address configured in IPsec policy or IPsec policy template view (using
the local-address command) for this command. If no local address is configured, specify the IP
address of the interface that uses the IPsec policy.
You can specify a maximum of six IKE keychains for an IKE profile. An IKE keychain specified earlier
has a higher priority. To give an IKE keychain a higher priority, you can configure this command for
the keychain. For example, suppose you specified IKE keychain A before specifying IKE keychain B,
and you configured the peer ID 2.2.0.0/16 for IKE keychain A and the peer ID 2.2.2.0/24 for IKE
keychain B. For the local interface with the IP address 3.3.3.3 to negotiate with the peer 2.2.2.6, IKE
keychain A is preferred because IKE keychain A was specified earlier. To use IKE keychain B, you
can use this command to restrict the application scope of IKE keychain B to address 3.3.3.3.
Examples
# Create the IKE keychain key1.
<Sysname> system-view
[Sysname] ike keychain key1
# Apply the IKE keychain key1 to the interface with the IP address 2.2.2.2 in the VPN instance vpn1.
[sysname-ike-keychain-key1] match local address 2.2.2.2 vpn-instance vpn1
match local address (IKE profile view)
Use match local address to specify a local interface or IP address to which an IKE profile can be
applied.
Use undo match local address to restore the default.
Syntax
match local address { interface-type interface-number | { ipv4-address | ipv6 ipv6-address }
[ vpn-instance vpn-instance-name ] }
undo match local address
Default
An IKE profile can be applied to any local interface or IP address.
Views
IKE profile view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies a local interface. It can be any Layer 3 interface.
ipv4-address: Specifies the IPv4 address of a local interface.
ipv6 ipv6-address: Specifies the IPv6 address of a local interface.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the IPv4 or IPv6
address belongs. The vpn-instance-name argument represents the VPN instance name, a
case-sensitive string of 1 to 31 characters. To specify an IP address on the public network, do not
specify this option.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS