H3C MSR Series Command Reference

453
Default
No trusted CA is specified.
Views
PKI domain view
Predefined user roles
network-admin
Parameters
name: Specifies the trusted CA by its name, a case-sensitive string of 1 to 63 characters.
Usage guidelines
To obtain a CA certificate in a PKI domain, you must specify the trusted CA name. The trusted CA
name uniquely identifies the CA to be used if multiple CAs exist on the CA server specified for the
PKI domain.
Make sure the specified CA name is consistent with the name of the CA that owns the CA certificate
to be obtained.
Examples
# Set the name of the trusted CA to new-ca.
<Sysname> system-view
[Sysname] pki domain aaa
[Sysname-pki-domain-aaa] ca identifier new-ca
certificate request entity
Use certificate request entity to specify the PKI entity for certificate request.
Use undo certificate request entity to restore the default.
Syntax
certificate request entity entity-name
undo certificate request entity
Default
No PKI entity is specified for certificate request.
Views
PKI domain view
Predefined user roles
network-admin
Parameters
entity-name: Specifies a PKI entity by its name, a case-insensitive string of 1 to 31 characters.
Usage guidelines
A PKI entity describes the identity attributes of an entity for certificate request, including the following
information:
• Common name.
• Organization.
• Unit in the organization.
• Locality.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS