785
Parameters
item-name: Specifies a name for the port forwarding item, a case-insensitive string of 1 to 31
characters.
Usage guidelines
A port forwarding item defines an accessible TCP service provided on an internal server. It contains
the following settings:
• A port forwarding instance.
A port forwarding instance is configured by using the local-port command. It makes an internal
TCP service accessible through a local address and port number on the SSL VPN client.
• (Optional.) A resource link.
A resource link is configured by using the execution command.
After you configure a resource link for a port forwarding item, the port forwarding item name will
be displayed on the SSL VPN Web page as a link. You can click the link to access the resource
directly.
Make sure the resource link matches the TCP service specified by the port forwarding instance.
After you create a port forwarding item, you can assign it to a port forwarding list by using the
resources port-forward-item command.
Examples
# Create a port forwarding item named pfitem1 and enter its view.
<Sysname> system-view
[Sysname] sslvpn context ctx1
[Sysname-sslvpn-context-ctx1] port-forward-item pfitem1
[Sysname-sslvpn-context-ctx1-port-forward-item-pfitem1]
Related commands
execution
local-port
resources port-forward-item
reset counters interface sslvpn-ac
Use reset counters interface sslvpn-ac to clear SSL VPN AC interface statistics.
Syntax
reset counters interface [ sslvpn-ac [ interface-number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
interface-number: Specifies the number of an SSL VPN AC interface, in the range of 0 to 4095.
Usage guidelines
Use this command to clear old statistics so you can observe new traffic statistics on an SSL VPN AC
interface.
• If you do not specify any parameters, this command clears statistics for all interfaces.
To Next Page
Loading...
Need help?
General
