H3C MSR Series

1070
Views
User view
Predefined user roles
network-admin
Parameters
dns: Specifies the DNS client verification feature.
http: Specifies the HTTP client verification feature.
tcp: Specifies the TCP client verification feature.
ip: Specifies the protected IPv4 list.
ipv6: Specifies the protected IPv6 list.
Examples
# Clear the protected IPv4 statistics for TCP client verification.
<Sysname> reset client-verify tcp protected ip statistics
Related commands
display client-verify protected ip
display client-verify protected ipv6
reset client-verify trusted
Use reset client-verify trusted to clear the trusted IP list for client verification.
Syntax
reset client-verify { dns | http | tcp } trusted { ip | ipv6 }
Views
User view
Predefined user roles
network-admin
Parameters
dns: Specifies the DNS client verification feature.
http: Specifies the HTTP client verification feature.
tcp: Specifies the TCP client verification feature.
ip: Specifies the trusted IPv4 list.
ipv6: Specifies the trusted IPv6 list.
Examples
# Clear the trusted IPv4 list for DNS client verification.
<Sysname> reset client-verify dns trusted ip
Related commands
display client-verify trusted ip
display client-verify trusted ipv6