H3C MSR Series Command Reference

938
[Sysname-connlmt-ipv6-policy-12] limit 2 acl ipv6 2001 per-destination amount 200 100
rate 10
6. Verify that when the connection number exceeds 200, new connections cannot be established
until the connection number goes below 100. (Details not shown.)
Related commands
connection-limit
display connection-limit
reset connection-limit statistics
Use reset connection-limit statistics to clear the connection limit statistics globally or on an
interface.
Syntax
Centralized devices in standalone mode:
reset connection-limit statistics { global | interface interface-type interface-number }
Distributed devices in standalone mode/centralized devices in IRF mode:
reset connection-limit statistics { global | interface interface-type interface-number } [ slot
slot-number ]
Distributed devices in IRF mode:
reset connection-limit statistics { global | interface interface-type interface-number } [ chassis
chassis-number slot slot-number ]
Views
User view
Predefined user roles
network-admin
network-operator
Parameters
global: Clears the global connection limit statistics.
interface interface-type interface-number: Specifies an interface by its type and number.
slot slot-number: Specifies a card by its slot number. This option is available only when you specify
the global keyword or specify a virtual interface, such as a VLAN interface or tunnel interface.
(Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. The slot-number argument
represents the ID of the IRF member device. This option is available only when you specify the
global keyword or specify a virtual interface, such as a VLAN interface or tunnel interface.
(Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. This option is available only when you specify the
global keyword or specify a virtual interface, such as a VLAN interface or tunnel interface.
(Distributed devices in IRF mode.)
Examples
# (Centralized devices in standalone mode.) Clear the connection limit statistics on GigabitEthernet
2/0/1.
<Sysname> reset connection-limit statistics interface gigabitethernet 2/0/1

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS