H3C MSR Series Command Reference

628
[Sysname] ikev2 keychain key1
# Create an IKEv2 peer named peer1.
[Sysname-ikev2-keychain-key1] peer peer1
# Specify the host name test of the IKEv2 peer.
[Sysname-ikev2-keychain-key1-peer-peer1] hostname test
Related commands
ikev2 keychain
peer
identity
Use identity to specify the ID of an IKEv2 peer.
Use undo identity to restore the default.
Syntax
identity { address { ipv4-address | ipv6 { ipv6-address } } | fqdn fqdn-name | email email-string |
key-id key-id-string }
undo identity
Default
The IKEv2 peer's ID is not specified.
Views
IKEv2 peer view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IPv4 address of the peer.
ipv6 ipv6-address: Specifies the IPv6 address of the peer.
fqdn fqdn-name: Specifies the FQDN of the peer. The fqdn-name argument is a case-sensitive
string of 1 to 255 characters, such as www.test.com.
email email-string: Specifies the email address of the peer. The email-string argument is a
case-sensitive string of 1 to 255 characters in the format defined by RFC 822, such as
esec@test.com.
key-id key-id: Specifies the remote gateway's key ID. The key-id argument is a case-sensitive string
of 1 to 255 characters, and is usually a vendor-specific string for doing proprietary types of
identification.
Usage guidelines
Only the responder can look up an IKEv2 peer by ID in IKEv2 negotiation. The initiator does not know
the peer ID when initiating the IKEv2 negotiation, so it cannot use an ID for IKEv2 peer lookup.
Examples
# Create an IKEv2 keychain named key1.
<Sysname> system-view
[Sysname] ikev2 keychain key1
# Create an IKEv2 peer named peer1.
[Sysname-ikev2-keychain-key1] peer peer1

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS