H3C MSR Series Command Reference

172
Related commands
display dot1x
dot1x handshake
Use dot1x handshake to enable the online user handshake feature.
Use undo dot1x handshake to disable the online user handshake feature.
Syntax
dot1x handshake
undo dot1x handshake
Default
The online user handshake feature is enabled.
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
The online user handshake feature enables the device to periodically send EAP-Request/Identity
packets to the client for verifying the connectivity status of online 802.1X users. The device sets a
user to the offline state if it does not receive an EAP-Response/Identity packet from the user after
making the maximum attempts within the handshake timer. To set the handshake timer, use the
dot1x timer handshake-period command. To set the maximum handshake attempts, use the
dot1x retry command.
Examples
# Enable the online user handshake feature on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dot1x handshake
Related commands
display dot1x
dot1x timer handshake-period
dot1x retry
dot1x handshake reply enable
Use dot1x handshake reply enable to enable the 802.1X online user handshake reply feature.
Use undo dot1x handshake reply enable to disable the 802.1X online user handshake reply
feature.
Syntax
dot1x handshake reply enable
undo dot1x handshake reply enable
Default
The 802.1X online user handshake reply feature is disabled.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS