940
Object group commands
The following matrix shows the feature and hardware compatibility:
Object group compatibility
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-
10-PoE/810-LM-HK/810-W-LM-HK
Yes
MSR810-LMS/810-LUS No
MSR2600-10-X1 Yes
MSR 2630 Yes
MSR3600-28/3600-51 Yes
MSR3600-28-SI/3600-51-SI Yes
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-D
P-DC
Yes
MSR 3610/3620/3620-DP/3640/3660 Yes
MSR5620/5660/5680 Yes
IPv6-related parameters are not supported on the following routers:
• MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM-HK/810-W-LM-HK.
• MSR3600-28-SI/3600-51-SI.
description
Use description to configure a description for an object group.
Use undo description to restore the default.
Syntax
description text
undo description
Default
No description is configured for an object group.
Views
Object group view
Predefined user roles
network-admin
Parameters
text: Specifies a description, a case-sensitive string of 1 to 127 characters.
Examples
# Configure the description as This is an IPv4 object-group for an IPv4 address object group.
<Sysname> system-view
[Sysname] object-group ip address ipgroup
[Sysname-obj-grp-ip-ipgroup] description This is an IPv4 object-group