H3C MSR Series

705
publickey keyname: Specifies the host public key of the server, which is used to authenticate the
server. The keyname argument is a case-insensitive string of 1 to 64 characters.
source: Specifies a source IPv6 address or source interface for IPv6 SCP packets. By default, the
device automatically selects a source IPv6 address for IPv6 SCP packets in compliance with RFC
3484. As a best practice to ensure successful IPv6 SCP connections, specify a loopback interface or
dialer interface as the source interface or specify that interface's IPv6 address as the source IPv6
address.
interface interface-type interface-number: Specifies a source interface by its type and number. The
IPv6 address of this interface is the source IPv6 address of the IPv6 SCP packets.
ipv6 ipv6-address: Specifies a source IPv6 address.
Examples
# Connect an SCP client to the SCP server 2000::1. Specify the public key of the server as svkey,
and download the file abc.txt from the server. The SCP client uses publickey authentication. Use the
following algorithms:
• Preferred key exchange algorithm: dh-group14-sha1.
• Preferred server-to-client encryption algorithm: aes128-cbc.
• Preferred client-to-server HMAC algorithm: sha1.
• Preferred server-to-client HMAC algorithm: sha1-96.
• Preferred compression algorithm: zlib.
<Sysname> scp ipv6 2000::1 get abc.txt prefer-kex dh-group14-sha1 prefer-stoc-cipher
aes128-cbc prefer-ctos-hmac sha1 prefer-stoc-hmac sha1-96 prefer-compress zlib public-key
svkey
sftp
Use sftp to establish a connection to an IPv4 SFTP server and enter SFTP client view.
Syntax
In non-FIPS mode:
sftp server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key { dsa | ecdsa | rsa } |
prefer-compress zlib | prefer-ctos-cipher { 3des-cbc | aes128-cbc | aes256-cbc | des-cbc } |
prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange-sha1 |
dh-group1-sha1 | dh-group14-sha1 } | prefer-stoc-cipher { 3des-cbc | aes128-cbc | aes256-cbc
| des-cbc } | prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 } ] * [ dscp dscp-value | public-key
keyname | source { interface interface-type interface-number | ip ip-address } ] *
In FIPS mode:
sftp server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key { ecdsa | rsa } |
prefer-compress zlib | prefer-ctos-cipher { aes128-cbc | aes256-cbc } | prefer-ctos-hmac
{ sha1 | sha1-96 } | prefer-kex dh-group14-sha1 | prefer-stoc-cipher { aes128-cbc |
aes256-cbc } | prefer-stoc-hmac { sha1 | sha1-96 } ] * [ public-key keyname | source { interface
interface-type interface-number | ip ip-address } ] *
Views
User view
Predefined user roles
network-admin
Parameters
server: Specifies a server by its IPv4 address or host name, a case-insensitive string of 1 to 253
characters.