H3C MSR Series

396
Examples
# Enable portal user synchronization for the portal authentication server pts and set the detection
timeout to 600 seconds. If a use has not appeared in the synchronization packets sent by the portal
authentication server for 600 seconds, the access device logs out the user.
<Sysname> system-view
[Sysname] portal server pts
[Sysname-portal-server-pts] user-sync timeout 600
Related commands
portal server
version
Use version to specify the version of the portal protocol.
Use undo version to restore the default.
Syntax
version version-number
undo version
Default
The version of the portal protocol is 1.
Views
MAC binding server view
Predefined user roles
network-admin
Parameters
version-number: Specifies the portal protocol version in the range of 1 to 3.
Usage guidelines
The specified portal protocol version must be the that required by the MAC binding server.
Examples
# Configure the device to use portal protocol version 2 to communicate with MAC binding server
mts.
<Sysname> system-view
[Sysname] portal mac-trigger-server mts
[Sysname-portal-mac-trigger-server-mts] version 2
Related commands
display portal mac-trigger-server
portal mac-trigger-server
vpn-instance
Use vpn-instance to specify an MPLS L3VPN instance for a portal Web server.
Use undo vpn-instance to restore the default.