H3C MSR Series

252
Related commands
portal auth-fail-record enable
reset portal auth-fail-record
display portal captive-bypass statistics
Use display portal captive-bypass statistics to display packet statistics for portal captive-bypass.
Syntax
Centralized devices in standalone mode:
display portal captive-bypass statistics
Distributed devices in standalone mode/centralized devices in IRF mode:
display portal captive-bypass statistics [ slot slot-number ]
Distributed devices in IRF mode:
display portal captive-bypass statistics [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays portal captive-bypass packet statistics for all cards. (Distributed devices in standalone
mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays portal captive-bypass packet statistics for all member devices.
(Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
portal captive-bypass packet statistics for all cards. (Distributed devices in IRF mode.)
Examples
# (Centralized devices in standalone mode.) Display portal captive-bypass packet statistics.
<Sysname> display portal captive-bypass statistics
User type Packets
iOS: 1
Android: 0
# (Distributed devices in standalone mode/centralized in IRF mode.) Display portal captive-bypass
packets on the specified slot.
<Sysname> display portal captive-bypass statistics slot 1
Slot 1:
User type Packets
iOS 1
Android 0