H3C MSR Series Command Reference

105
[Sysname] radius scheme radius1
[Sysname-radius-radius1]
Related commands
display radius scheme
radius session-control client
Use radius session-control client to specify a RADIUS session-control client.
Use undo radius session-control client to remove the specified RADIUS session-control clients.
Syntax
radius session-control client { ip ipv4-address | ipv6 ipv6-address } [ key { cipher | simple } string
| vpn-instance vpn-instance-name ] *
undo radius session-control client { all | { ip ipv4-address | ipv6 ipv6-address } [ vpn-instance
vpn-instance-name ] }
Default
No RADIUS session-control clients are specified. The device searches all RADIUS scheme settings
to verify session-control packets.
Views
System view
Predefined user roles
network-admin
Parameters
ip ipv4-address: Specifies a session-control client by its IPv4 address.
ipv6 ipv6-address: Specifies a session-control client by its IPv6 address.
key: Specifies the shared key for secure communication with the session-control client.
cipher: Specifies the key in encrypted form.
simple: Specifies the key in plaintext form. For security purposes, the key specified in plaintext form
will be stored in encrypted form.
string: Specifies the key. This argument is case sensitive.
• In non-FIPS mode, the encrypted form of the key is a string of 1 to 117 characters. The plaintext
form of the key is a string of 1 to 64 characters.
• In FIPS mode, the encrypted form of the key is a string of 15 to 117 characters. The plaintext
form of the key is a string of 15 to 64 characters. The plaintext string must contain digits,
uppercase letters, lowercase letters, and special characters.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance to which the RADIUS
session-control client belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31
characters. If the client is on the public network, do not specify this option.
all: Specifies all session-control clients.
Usage guidelines
This command takes effect only when the RADIUS session-control feature is enabled.
Specify a RADIUS server that runs on IMC as a session-control client on the device to verify the
session-control packets sent from the RADIUS server. The device matches the received packets to
the session-control client based on IP and VPN instance settings, and then uses the client shared
key to validate the packets.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS