313
Related commands
default-logon-page
portal local-web-server
logout-notify
Use logout-notify to set the maximum number of times and the interval for retransmitting a logout
notification packet.
Use undo logout-notify to restore the default.
Syntax
logout-notify retry retries interval interval
undo logout-notify
Default
The device does not retransmit a logout notification packet.
Views
Portal authentication server view
Predefined user roles
network-admin
Parameters
retry retries: Specifies the maximum number of retries, in the range of 1 to 5.
interval interval: Specifies the retry interval, in the range of 1 to 10 seconds.
Usage guidelines
The following matrix shows the command and hardware compatibility:
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/
810-LM-HK/810-W-LM-HK/810-LMS/810-LUS
No
MSR2600-10-X1 Yes
MSR 2630 Yes
MSR3600-28/3600-51 Yes
MSR3600-28-SI/3600-51-SI Yes
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC Yes
MSR 3610/3620/3620-DP/3640/3660 Yes
MSR5620/5660/5680 Yes
A logout notification packet is a UDP packet that the device sends to the portal authentication server
for forcibly logging out a portal user. To increase the delivery reliability, you can set the maximum
number of times and the interval for retransmitting a logout notification packet.
After the device sends a logout notification packet for logging out a portal user, it waits for a response
from the portal authentication server. If the device receives a response within the specified period of
time (maximum number of retries × retry interval), it logs out and deletes the user immediately. If the
device does not receive a response within the period of time, the device logs out and deletes the user
when the period of time elapses.
To Next Page
Loading...
