69
Predefined user roles
network-admin
Parameters
to: Specifies the email recipient.
guest: Specifies the local guest.
manager: Specifies the guest manager.
sponsor: Specifies the guest sponsor.
body body-string: Configures the body content. The body-string argument is a case-sensitive string
of 1 to 255 characters.
subject sub-string: Configures the email subject. The sub-string argument is a case-sensitive string
of 1 to 127 characters.
Usage guidelines
Email notifications need to be sent to notify the local guests, guest sponsors, or guest managers of
the guest account information or guest registration requests. Use this command to configure the
subject and body for the email notifications to be sent by the device.
You can configure one subject and one body for each email recipient. If you configure the subject or
body content multiple times for the same recipient, the most recent configuration takes effect.
You must configure both the subject and body for each recipient.
Examples
# Configure the subject and body for the email notifications to send to the local guest.
<Sysname> system-view
[Sysname] local-guest email format to guest subject Guest account information
[Sysname] local-guest email format to guest body A guest account has been created for your
use. The username, password, and valid dates for the account are given below.
Related commands
local-guest email sender
local-guest email smtp-server
local-guest manager-email
local-guest send-email
local-guest email sender
Use local-guest email sender to configure the email sender address in email notifications of local
guests sent by the device.
Use undo local-guest email sender to restore the default.
Syntax
local-guest email sender email-address
undo local-guest email sender
Default
No email sender address is configured for the email notifications of local guests.
Views
System view
To Next Page
Loading...
Need help?
General
