H3C MSR Series Command Reference

79
Predefined user roles
network-admin
Parameters
cipher: Specifies a password in encrypted form.
hash: Specifies a password encrypted by the hash algorithm.
simple: Specifies a password in plaintext form. For security purposes, the password specified in
plaintext form will be stored in encrypted form.
string: Specifies the password string. This argument is case sensitive.
• In non-FIPS mode:
 The encrypted form of the password is a string of 1 to 117 characters.
 The hashed form of the password is a string of 1 to 110 characters.
 The plaintext form of the password is a string of 1 to 63 characters.
• In FIPS mode, the password is in plaintext form and is a string of 15 to 63 characters. The string
must contain digits, uppercase letters, lowercase letters, and special characters (see
"Password control commands").
Usage guidelines
If you do not specify any parameters, you enter the interactive mode to set a plaintext password.
Only device management users support passwords set in interactive mode.
In non-FIPS mode, a non-password-protected user passes authentication if the user provides the
correct username and passes attribute checks. To enhance security, configure a password for each
local user.
In FIPS mode, only password-protected users can pass authentication. For a device management
user, you must set the password in interactive mode.
Examples
# Set the password to 123456TESTplat&! in plaintext form for device management user user1.
<Sysname> system-view
[Sysname] local-user user1 class manage
[Sysname-luser-manage-user1] password simple 123456TESTplat&!
# Configure the password in interactive mode for device management user test.
<Sysname> system-view
[Sysname] local-user test class manage
[Sysname-luser-manage-test] password
Password:
confirm :
# Set the password to 123456TESTuser&! in plaintext form for network access user user2.
<Sysname> system-view
[Sysname] local-user user2 class network
[Sysname-luser-network-user2] password simple 123456TESTuser&!
Related commands
display local-user
phone
Use phone to specify the phone number of a local guest.
Use undo phone to restore the default.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS