H3C MSR Series

106
The IP, VPN instance, and shared key settings of the session-control client must be the same as the
settings of the RADIUS server.
The system supports multiple RADIUS session-control clients.
Examples
# Specify a session-control client with IP address 10.110.1.2 and shared key 12345 in plaintext form.
<Sysname> system-view
[Sysname] radius session-control client ip 10.110.1.2 key simple 12345
Related commands
radius session-control enable
radius session-control enable
Use radius session-control enable to enable the RADIUS session-control feature.
Use undo radius session-control enable to disable the RADIUS session-control feature.
Syntax
radius session-control enable
undo radius session-control enable
Default
The RADIUS session-control feature is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The RADIUS session-control feature enables the device to receive RADIUS session-control packets
on UDP port 1812 from a RADIUS server that runs on IMC.
Examples
# Enable the RADIUS session-control feature.
<Sysname> system-view
[Sysname] radius session-control enable
radius-server test-profile
Use radius-server test-profile to configure a test profile for detecting the RADIUS server status.
Use undo radius-server test-profile to delete a RADIUS test profile.
Syntax
radius-server test-profile profile-name username name [ interval interval ]
undo radius-server test-profile profile-name
Default
No RADIUS test profiles exist.
Views
System view