EasyManuals Logo

H3C MSR Series Command Reference

H3C MSR Series
1187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #421 background imageLoading...
Page #421 background image
398
The tracked interface receives 2G signal or no signal.
In the current software version, this feature can track signal information only for Etherchannel
interfaces.
This feature applies only to IPv4 users.
This feature requires that the webpage to which the redirect URL points must be configured on the
device. The redirect URL is specified by the web-redirect url command.
Examples
# Enable Web redirect track on GigabitEthernet 1/0/1 to track network signal information on
Etherchannel 2/0:0.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] web-redirect track interface eth-channel 2/0:0
Related commands
display web-redirect rule
web-redirect url
web-redirect url
Use web-redirect url to enable the Web redirect feature.
Use undo web-redirect url to disable the Web redirect feature.
Syntax
web-redirect [ ipv6 ] url url-string [ interval interval ]
undo web-redirect [ ipv6 ]
Default
The Web redirect feature is disabled.
Views
Interface view
Service template view
Predefined user roles
network-admin
Parameters
ipv6: Specifies the IPv6 Web redirect feature. Do not specify this keyword for the IPv4 Web redirect
feature.
url url-string: Specifies the URL to which the user is redirected. The URL is required to be complete
and begins with http:// or https://, a string of 1 to 256 characters.
interval interval: Specifies the time interval at which the user is redirected to the specified URL. It is
in the range of 60 to 86400 seconds. The default interval is 86400 seconds.
Usage guidelines
This feature redirects a user on an interface or a service template to the specified URL before the
user can access an external network through a Web browser. After the specified interval, the user is
redirected to the specified URL again.
To push different advertisement pages to different users, you can carry parameters in the redirect
URL (by using the url url-string option) as needed. The following parameters are available:

Table of Contents

Other manuals for H3C MSR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C MSR Series and is the answer not in the manual?

H3C MSR Series Specifications

General IconGeneral
CategoryNetwork Router
IPv6 SupportYes
DimensionsVaries by model
WeightVaries by model
Product TypeModular Router
PortsVaries by model
WAN InterfacesVaries by model
FirewallYes
QoSYes
Wireless SupportVaries by model
USB PortsVaries by model
Console PortYes
Power SupplyVaries by model
RedundancyVaries by model
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Humidity5% to 95% non-condensing
SeriesMSR
CertificationsCE, FCC, RoHS

Related product manuals