519
Table 78 Command output
IPsec profile IPsec profile name.
Mode Negotiation mode used by the IPsec profile, manual or IKE.
Description Description of the IPsec profile.
Transform set IPsec transform set used by the IPsec profile.
Related commands
ipsec profile
display ipsec sa
Use display ipsec sa to display information about IPsec SAs.
Syntax
display ipsec sa [ brief | count | interface interface-type interface-number | { ipv6-policy | policy }
policy-name [ seq-number ] | profile profile-name | remote [ ipv6 ] ip-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
brief: Displays brief information about all IPsec SAs.
count: Displays the number of IPsec SAs.
interface interface-type interface-number: Specifies an interface by its type and number.
ipv6-policy: Displays detailed information about IPsec SAs created by using a specified IPv6 IPsec
policy.
policy: Displays detailed information about IPsec SAs created by using a specified IPv4 IPsec
policy.
policy-name: Specifies an IPsec policy by its name, a case-insensitive string of 1 to 63 characters.
seq-number: Specifies an IPsec policy entry by its sequence number. The value range is 1 to 65535.
profile: Displays detailed information about IPsec SAs created by using a specified IPsec profile.
profile-name: Specifies an IPsec profile by its name, a case-insensitive string of 1 to 63 characters.
remote ip-address: Specifies an IPsec SA by its remote end IP address.
ipv6: Specifies an IPsec SA by its remote end IPv6 address. If this keyword is not specified, the
specified remote end IP address is an IPv4 address.
Usage guidelines
If you do not specify any parameters, this command displays detailed information about all IPsec
SAs.
Examples
# Display brief information about IPsec SAs.
To Next Page
Loading...
Need help?
General
