142
Default
No LDAP authorization server is specified.
Views
LDAP scheme view
Predefined user roles
network-admin
Parameters
server-name: Specifies the name of an existing LDAP server, a case-insensitive string of 1 to 64
characters.
Usage guidelines
You can specify only one LDAP authorization server in an LDAP scheme. If you execute this
command multiple times, the most recent configuration takes effect.
Examples
# In LDAP scheme ldap1, specify the LDAP authorization server as ccc.
<Sysname> system-view
[Sysname] ldap scheme ldap1
[Sysname-ldap-ldap1] authorization-server ccc
Related commands
display ldap scheme
ldap server
display ldap scheme
Use display ldap scheme to display the LDAP scheme configuration.
Syntax
display ldap scheme [ ldap-scheme-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ldap-scheme-name: Specifies an LDAP scheme by its name, a case-insensitive string of 1 to 32
characters. If you do not specify an LDAP scheme, this command displays the configuration of all
LDAP schemes.
Examples
# Display the configuration of all LDAP schemes.
<Sysname> display ldap scheme
Total 1 LDAP schemes
------------------------------------------------------------------
LDAP scheme name : aaa
Authentication server : aaa
To Next Page
Loading...
