H3C MSR Series

1095
Static IPv6 SG is supported only on the following ports:
• Layer 2 Ethernet ports on the following modules:
 HMIM-8GSW.
 HMIM-8GSWF.
 HMIM-24GSW.
 HMIM-24GSWP.
 SIC-4GSW.
 SIC-4GSWP.
• Fixed Layer 2 Ethernet ports on the following routers:
 MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM-HK/810-W-LM-HK.
 MSR2600-10-X1.
 MSR3600-28/3600-51.
Dynamic IPv4 SG is supported only on the following ports:
• Layer 2 Ethernet ports on the following modules:
 HMIM-8GSW.
 HMIM-8GSWF.
 HMIM-24GSW.
 HMIM-24GSWP.
• Fixed Layer 2 Ethernet ports on the following routers:
 MSR2600-10-X1.
 MSR3600-28/3600-51.
 MSR3600-28-SI/3600-51-SI.
Dynamic IPv6 SG is supported only on the following ports:
• Layer 2 Ethernet ports on the following modules:
 HMIM-8GSW.
 HMIM-8GSWF.
 HMIM-24GSW.
 HMIM-24GSWP.
• Fixed Layer 2 Ethernet ports on the following routers:
 MSR2600-10-X1.
 MSR3600-28/3600-51.
display ip source binding
Use display ip source binding to display IPv4SG bindings.
Syntax
Centralized devices in standalone mode:
display ip source binding [ static | [ vpn-instance vpn-instance-name ] [ dhcp-snooping | dot1x
| wlan-snooping ] ] [ ip-address ip-address ] [ mac-address mac-address ] [ vlan vlan-id ]
[ interface interface-type interface-number ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display ip source binding [ static | [ vpn-instance vpn-instance-name ] [ dhcp-snooping | dot1x
| wlan-snooping ] ] [ ip-address ip-address ] [ mac-address mac-address ] [ vlan vlan-id ]
[ interface interface-type interface-number ] [ slot slot-number ]