H3C MSR Series Command Reference

58
Usage guidelines
To perform local authentication of a user, the device matches the actual user attributes with the
configured binding attributes. If the user has a non-matching attribute or lacks a required attribute,
the user will fail authentication.
Binding attribute check takes effect on all access services. Configure the binding attributes for a user
based on the access services and make sure the device can obtain all attributes to be checked from
the user's packet. For example, you can configure an IP address binding for an 802.1X user,
because 802.1X authentication can include the user's IP address in the packet. However, you cannot
configure IP address bindings for MAC authentication users, because MAC authentication does not
use IP addresses.
The binding interface type must meet the requirements of the local user. Configure the binding
interface based on the service type of the user.
• If the user is an 802.1X user, specify the 802.1X-enabled Layer 2 Ethernet interface through
which the user accesses the device.
• If the user is a MAC authentication user, specify the MAC authentication-enabled Layer 2
Ethernet interface through which the user accesses the device.
• If the user is a portal user, specify the portal-enabled interface through which the user accesses
the device. Specify the Layer 2 Ethernet interface if portal is enabled on a VLAN interface and
the portal roaming enable command is not configured.
Examples
# Bind IP address 3.3.3.3 with network access user abc.
<Sysname> system-view
[Sysname] local-user abc class network
[Sysname-luser-network-abc] bind-attribute ip 3.3.3.3
Related commands
display local-user
company
Use company to specify the company of a local guest.
Use undo company to restore the default.
Syntax
company company-name
undo company
Default
No company is specified for a local guest.
Views
Local guest view
Predefined user roles
network-admin
Parameters
company-name: Specifies the company name, a case-sensitive string of 1 to 255 characters.
Examples
# Specify company yyy for local guest abc.
<Sysname> system-view

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS