H3C MSR Series Command Reference

130
Related commands
display hwtacacs scheme
key (HWTACACS scheme view)
secondary authentication (HWTACACS scheme view)
vpn-instance (HWTACACS scheme view)
primary authorization
Use primary authorization to specify the primary HWTACACS authorization server.
Use undo primary authorization to restore the default.
Syntax
primary authorization { ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher | simple }
string | single-connection | vpn-instance vpn-instance-name ] *
undo primary authorization
Default
The primary HWTACACS authorization server is not specified.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IPv4 address of the primary HWTACACS authorization server.
ipv6 ipv6-address: Specifies the IPv6 address of the primary HWTACACS authorization server.
port-number: Specifies the service port number of the primary HWTACACS authorization server. The
value range for the TCP port number is 1 to 65535. The default setting is 49.
key: Specifies the shared key for secure communication with the primary HWTACACS authorization
server.
cipher: Specifies the key in encrypted form.
simple: Specifies the key in plaintext form. For security purposes, the key specified in plaintext form
will be stored in encrypted form.
string: Specifies the key. This argument is case sensitive.
• In non-FIPS mode, the encrypted form of the key is a string of 1 to 373 characters. The plaintext
form of the key is a string of 1 to 255 characters.
• In FIPS mode, the encrypted form of the key is a string of 15 to 373 characters. The plaintext
form of the key is a string of 15 to 255 characters. The plaintext string must contain digits,
uppercase letters, lowercase letters, and special characters.
single-connection: The device and the primary HWTACACS authorization server use the same
TCP connection to exchange all authorization packets for all users. If you do not specify this
keyword, the device establishes a new TCP connection each time it exchanges authorization
packets with the primary authorization server for a user. As a best practice, specify this keyword to
reduce TCP connections for improving system performance if the HWTACACS server supports the
single-connection method.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS