493
This command is not saved in the configuration file.
Examples
# Display information about the certificate request in PKCS#10 format.
<Sysname> system-view
[Sysname] pki request-certificate domain aaa pkcs10
*** Request for general certificate ***
-----BEGIN NEW CERTIFICATE REQUEST-----
MIIBTDCBtgIBADANMQswCQYDVQQDEwJqajCBnzANBgkqhkiG9w0BAQEFAAOBjQAw
gYkCgYEAw5Drj8ofs9THA4ezkDcQPBy8pvH1kumampPsJmx8sGG52NFtbrDTnTT5
ALx3LJijB3d/ndKpcHT/DfbJVDCn5gdw32tBZyCkEwMHZN3ol2z7Nmdcu5TED6iN8
4m+hfp1QWoV6lty3o9pxAXuQl8peUDcfN6WV3LBXYyl1WCtkLkECAwEAAaAAMA0G
CSqGSIb3DQEBBAUAA4GBAA8E7BaIdmT6NVCZgv/I/1tqZH3TS4e4H9Qo5NiCKiEw
R8owVmA0XVtGMbyqBNcDTG0f5NbHrXZQT5+MbFJOnm5K/mn1ro5TJKMTKV46PlCZ
JUjsugaY02GBY0BVcylpC9iIXLuXNIqjh1MBIqVsa1lQOHS7YMvnop6hXAQlkM4c
-----END NEW CERTIFICATE REQUEST-----
# Request the local certificates.
[Sysname] pki request-certificate domain openca
Start to request general certificate ...
……
Certificate requested successfully.
Related commands
display pki certificate
pki retrieve-certificate
Use pki retrieve-certificate to obtain a certificate from the certificate distribution server.
Syntax
pki retrieve-certificate domain domain-name { ca | local | peer entity-name }
Views
System view
Predefined user roles
network-admin
Parameters
domain-name: Specifies a PKI domain by its name, a case-insensitive string of 1 to 31 characters.
The domain name cannot contain the special characters listed in Table 73.
Table 73 Special characters
Tilde ~ Dot .
Asterisk * Left angle bracket <
Backslash \ Right angle bracket >
Vertical bar | Quotation marks "
Colon : Apostrophe '
To Next Page
Loading...
