235
Predefined user roles
network-admin
Parameters
url-string: Specifies the URL of the QQ authentication server, a case-sensitive string of 1 to 256
characters. Make sure that you specify the actual URL of the QQ authentication server.
Examples
# Specify http://oauth.qq.com as the URL of the QQ authentication server.
<Sysname> system-view
[Sysname] portal extend-auth-server qq
[Sysname-portal-extend-auth-server-qq] auth-url http://oauth.qq.com
Related commands
display portal extend-auth-server
binding-retry
Use binding-retry to specify the maximum number of attempts and the interval for sending MAC
binding queries to the MAC binding server.
Use undo binding-retry to restore the default.
Syntax
binding-retry { retries | interval interval } *
undo binding-retry
Default
The maximum number of query attempts is 3 and the query interval is 1 second.
Views
MAC binding server view
Predefined user roles
network-admin
Parameters
retries: Specifies the maximum number of MAC binding query attempts, in the range of 1 to 10.
interval interval: Specifies the query interval in the range of 1 to 60 seconds.
Usage guidelines
If the device does not receive a response from the MAC binding server after the maximum number is
reached, the device determines that the MAC binding server is unreachable. The device performs
normal portal authentication for the user. The user needs to enter the username and password for
authentication.
If you execute this command multiple times in the same MAC binding server view, the most recent
configuration takes effect.
Examples
# Set the maximum number of MAC binding query attempts to 3 and the query interval to 60
seconds.
<Sysname> system-view
[Sysname] portal mac-trigger-server mts
[Sysname-portal-mac-trigger-server-mts] binding-retry 3 interval 60
To Next Page
Loading...
Need help?
General
