743
Interface Abbreviated interface name.
Link
Physical link state of the interface:
• UP—The link is physically up.
• DOWN—The link is physically down.
• ADM—The interface has been shut down by using the shutdown
command. To restore the physical state of the interface, use the undo
shutdown command.
Protocol
Data link layer protocol state of the interface:
• UP—The data link protocol state of the interface is up.
• UP(s)—The data link protocol state of the interface is up, but the link
is temporarily set up on demand or does not exist. This attribute is
available for null interfaces and loopback interfaces.
• DOWN—The data link protocol state of the interface is down.
Primary IP Primary IP address of the interface.
Description Description for the interface.
Cause
Causes for the physical state of DOWN:
• Administratively—The link has been shut down by using the
shutdown command. To bring it up, use the undo shutdown
command.
• Not connected—No physical connection exists.
Related commands
reset counters interface
display sslvpn context
Use display sslvpn context to display SSL VPN context information.
Syntax
display sslvpn context [ brief | name context-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
brief: Displays brief SSL VPN context information. If you do not specify this keyword, the command
displays detailed SSL VPN context information.
name context-name: Specifies an SSL VPN context by its name. An SSL VPN context name is a
case-insensitive string of 1 to 31 characters, and can contain only letters, digits, and underscores (_).
If you do not specify an SSL VPN context, this command displays information about all SSL VPN
contexts.
Examples
# Display detailed information about all SSL VPN contexts.
<Sysname> display sslvpn context
Context name: ctx1