H3C MSR Series Command Reference

177
dot1x port-method
Use dot1x port-method to specify an access control method for the port.
Use undo dot1x port-method to restore the default.
Syntax
dot1x port-method { macbased | portbased }
undo dot1x port-method
Default
MAC-based access control applies.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
macbased: Uses MAC-based access control on the port to separately authenticate each user
attempting to access the network. Using this method, when an authenticated user logs off, no other
online users are affected. This keyword is supported only on the following ports:
• Layer 2 Ethernet ports on the following modules:
 HMIM-8GSW.
 HMIM-24GSW.
 HMIM-24GSWP.
 SIC-4GSW.
• Fixed Layer 2 Ethernet ports on the following routers:
 MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-LM-HK/810-W-LM-HK/810-10-PoE/81
0-LMS/810-LUS.
 MSR2600-10-X1
 MSR3600-28/3600-51.
 MSR3600-28-SI/3600-51-SI.
portbased: Uses port-based access control on the port. Using this method, once an 802.1X user
passes authentication on the port, any subsequent user can access the network through the port
without authentication. When the authenticated user logs off, all other users are logged off.
Examples
# Configure GigabitEthernet 1/0/1 to implement port-based access control.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dot1x port-method portbased
Related commands
display dot1x
dot1x quiet-period
Use dot1x quiet-period to enable the quiet timer.
Use undo dot1x quiet-period to disable the quiet timer.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS