764
Use undo gateway to delete associated SSL VPN gateways.
Syntax
gateway gateway-name [ domain domain-name | virtual-host virtual-host-name ]
undo gateway [ gateway-name ]
Default
An SSL VPN context is not associated with an SSL VPN gateway.
Views
SSL VPN context view
Predefined user roles
network-admin
Parameters
gateway-name: Specifies an SSL VPN gateway by its name, a case-insensitive string of 1 to 31
characters. Valid characters are letters, digits, and underscores (_).
domain domain-name: Specifies a domain name for the SSL VPN context, a case-insensitive string
of 1 to 127 characters. Valid characters are letters, digits, underscores (_), and hyphens (-).
virtual-host virtual-host-name: Specifies a virtual host name for the SSL VPN context, a
case-insensitive string of 1 to 127 characters. Valid characters are letters, digits, underscores (_),
hyphens (-), and dots (.).
Usage guidelines
When you associate an SSL VPN context with an SSL VPN gateway, follow these guidelines:
• Make sure the context has a domain name or virtual host name different than any existing
contexts associated with the SSL VPN gateway.
The SSL VPN gateway uses the domain name or virtual host name that a remote user entered
to determine the SSL VPN context to which the user belongs.
• If you do not specify a domain name or virtual host name for the context, you cannot associate
other SSL VPN contexts with the SSL VPN gateway.
You can associate an SSL VPN context with a maximum of 10 SSL VPN gateways.
Examples
# Associate SSL VPN context ctx1 with SSL VPN gateway gw1, and specify the domain name as
domain1 for the context.
<Sysname> system-view
[Sysname] sslvpn context ctx1
[Sysname-sslvpn-context-ctx1] gateway gw1 domain domain1
Related commands
display sslvpn context
heading
Use heading to configure a heading for a URL list.
Use undo heading to restore the default.
Syntax
heading string
undo heading
To Next Page
Loading...
