EasyManuals Logo

H3C MSR Series Command Reference

H3C MSR Series
1187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1109 background imageLoading...
Page #1109 background image
1086
drop: Drops subsequent SYN packets destined for the protected IP address.
logging: Enables logging for SYN flood attack events.
none: Takes no action.
Usage guidelines
With SYN flood attack detection configured for an IP address, the device is in attack detection state.
When the sending rate of SYN packets to the IP address reaches the threshold, the device enters
prevention state and takes the specified actions. When the rate is below the silence threshold
(three-fourths of the threshold), the device returns to the attack detection state.
Examples
# Configure SYN flood attack detection for 192.168.1.2 in the attack defense policy atk-policy-1.
<Sysname> system-view
[Sysname] attack-defense policy atk-policy-1
[Sysname-attack-defense-policy-atk-policy-1] syn-flood detect ip 192.168.1.2 threshold
2000
Related commands
syn-flood action
syn-flood detect non-specific
syn-flood threshold
syn-flood detect non-specific
Use syn-flood detect non-specific to enable global SYN flood attack detection.
Use undo syn-flood detect non-specific to disable global SYN flood attack detection.
Syntax
syn-flood detect non-specific
undo syn-flood detect non-specific
Default
Global SYN flood attack detection is disabled.
Views
Attack defense policy view
Predefined user roles
network-admin
Usage guidelines
The global SYN flood attack detection applies to all IP addresses except for those specified by the
syn-flood detect command. The global detection uses the global trigger threshold set by the
syn-flood threshold command and global actions specified by the syn-flood action command.
Examples
# Enable global SYN flood attack detection in the attack defense policy atk-policy-1.
<Sysname> system-view
[Sysname] attack-defense policy atk-policy-1
[Sysname-attack-defense-policy-atk-policy-1] syn-flood detect non-specific
Related commands
syn-flood action

Table of Contents

Other manuals for H3C MSR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C MSR Series and is the answer not in the manual?

H3C MSR Series Specifications

General IconGeneral
CategoryNetwork Router
IPv6 SupportYes
DimensionsVaries by model
WeightVaries by model
Product TypeModular Router
PortsVaries by model
WAN InterfacesVaries by model
FirewallYes
QoSYes
Wireless SupportVaries by model
USB PortsVaries by model
Console PortYes
Power SupplyVaries by model
RedundancyVaries by model
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Humidity5% to 95% non-condensing
SeriesMSR
CertificationsCE, FCC, RoHS

Related product manuals