H3C MSR Series

371
Default
After portal safe-redirect is enabled, the device redirects only HTTP requests with the GET method.
Views
System view
Predefined user roles
network-admin
Parameters
get: Specifies the GET request method.
post: Specifies the POST request method.
Usage guidelines
After you specify HTTP request methods for portal safe-redirect, the device redirects only the HTTP
requests with the specified methods to the portal Web server.
Before you execute this command, make sure the portal safe-redirect feature is enabled.
If you configure this command multiple times, the most recent configuration takes effect.
Examples
# Specify the GET request method for portal safe-redirect.
<Sysname> system-view
[Sysname] portal safe-redirect method get
Related commands
portal safe-redirect enable
portal safe-redirect user-agent
Use portal safe-redirect user-agent to specify a browser type for portal safe-redirect.
Use undo portal safe-redirect user-agent to delete a browser type for portal safe-redirect.
Syntax
portal safe-redirect user-agent user-agent-string
undo portal safe-redirect user-agent user-agent-string
Default
After portal safe-redirect is enabled, the device redirects the HTTP packets matching any browser
types in Table 46.
Views
System view
Predefined user roles
network-admin
Parameters
user-agent-string: Specifies a browser type in HTTP User Agent, a case-sensitive string of 1 to 255
characters. You can specify the browser types as shown in Table 46.