H3C MSR Series Command Reference

984
Related commands
blacklist ip
blacklist ipv6
blacklist object-group
Use blacklist object-group to add an address object group to the blacklist.
Use undo blacklist object-group to restore the default.
Syntax
blacklist object-group object-group-name
undo blacklist object-group
Default
No address object group is added to the blacklist.
Views
System view
Predefined user roles
network-admin
Parameters
object-group-name: Specifies an address object group by its name, a case-insensitive string of 1 to
31 characters.
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
Command compatibility
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE
/810-LM-HK/810-W-LM-HK
Yes
MSR810-LMS/810-LUS No
MSR2600-10-X1 Yes
MSR 2630 Yes
MSR3600-28/3600-51 Yes
MSR3600-28-SI/3600-51-SI Yes
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC Yes
MSR 3610/3620/3620-DP/3640/3660 Yes
MSR5620/5660/5680 Yes
This command must be used together with the address object group feature. For more information
about address object groups, see "Configuring object groups."
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Add address object group object-group1 to the blacklist.
<Sysname> system-view
[Sysname] blacklist object-group object-group1

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS