H3C MSR Series Command Reference

180
Syntax
dot1x retry retries
undo dot1x retry
Default
A maximum of two attempts are made to send an authentication request to a client.
Views
System view
Predefined user roles
network-admin
Parameters
retries: Specifies the maximum number of attempts for sending an authentication request to a client.
The value range is 1 to 10.
Usage guidelines
The access device retransmits an authentication request to a client in any of the following situations:
• The device does not receive any responses from the client within the username request timeout
timer. The timer is set by using the dot1x timer tx-period tx-period-value command for the
EAP-Request/Identity packet.
• The device does not receive any responses from the client within the client timeout timer. The
timer is set by using the dot1x timer supp-timeout supp-timeout-value command for the
EAP-Request/MD5-Challenge packet.
The access device stops retransmitting the request, if it has made the maximum number of request
transmission attempts but still received no response.
Examples
# Set the maximum number of attempts to 9 for sending an authentication request to a client.
<Sysname> system-view
[Sysname] dot1x retry 9
Related commands
display dot1x
dot1x timer
dot1x smarton
Use dot1x smarton to enable the SmartOn feature on a port.
Use undo dot1x smarton to disable the SmartOn feature on a port.
Syntax
dot1x smarton
undo dot1x smarton
Default
The SmartOn feature is disabled on a port.
Views
Ethernet interface view

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS