H3C MSR Series Command Reference

102
radius dscp
Use radius dscp to change the DSCP priority of RADIUS packets.
Use undo radius dscp to restore the default.
Syntax
radius [ ipv6 ] dscp dscp-value
undo radius [ ipv6 ] dscp
Default
The DSCP priority of RADIUS packets is 0.
Views
System view
Predefined user roles
network-admin
Parameters
ipv6: Specifies the IPv6 RADIUS packets. If you do not specify this keyword, the command sets the
DSCP priority for the IPv4 RADIUS packets.
dscp-value: Specifies the DSCP priority of RADIUS packets, in the range of 0 to 63. A larger value
represents a higher priority.
Usage guidelines
Use this command to set the DSCP priority in the ToS field of RADIUS packets for changing their
transmission priority.
Examples
# Set the DSCP priority of IPv4 RADIUS packets to 10.
<Sysname> system-view
[Sysname] radius dscp 10
radius dynamic-author server
Use radius dynamic-author server to enable the RADIUS DAS feature and enter RADIUS DAS
view.
Use undo radius dynamic-author server to disable the RADIUS DAS feature.
Syntax
radius dynamic-author server
undo radius dynamic-author server
Default
The RADIUS DAS feature is disabled.
Views
System view
Predefined user roles
network-admin

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS