738
Usage guidelines
A file policy rewrites a file carried in an HTTP response to a file of the type specified by this
command. If the specified file type is different from that indicated by the content-type field in the
HTTP response, users might not be able to read the file correctly.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Configure file policy fp to rewrite files to HTML files.
<Sysname> system-view
[Sysname] sslvpn context ctx
[Sysname-sslvpn-context-ctx] file-policy fp
[Sysname-sslvpn-context-ctx-file-policy-fp] content-type html
default
Use default to restore the default settings for an SSL VPN AC interface.
Syntax
default
Views
SSL VPN AC interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of
the impact of this command when you use it on a live network.
This command might fail to restore the default settings for some commands for reasons such as
command dependencies or system restrictions. Use the display this command in interface view to
identify these commands. Use their undo forms or follow the command reference to restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve
the problem.
Examples
# Restore the default settings of sslvpn-ac 1000.
<Sysname> system-view
[Sysname] interface sslvpn-ac 1000
[Sysname-SSLVPN-AC1000] default
This command will restore the default settings. Continue? [Y/N]:y
default-policy-group
Use default-policy-group to specify a policy group as the default policy group.
Use undo default-policy-group to restore the default.
Syntax
default-policy-group group-name
undo default-policy-group
To Next Page
Loading...
Need help?
General
