H3C MSR Series

15
Syntax
accounting start-fail { offline | online }
undo accounting start-fail
Default
The device does not perform actions on users that encounter accounting-start failures.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
offline: Logs off users that encounter accounting-start failures.
online: Does not perform actions on users that encounter accounting-start failures.
Examples
# In ISP domain test, configure the device not to perform actions on users that encounter
accounting-start failures.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting start-fail online
accounting update-fail
Use accounting update-fail to configure access control for users that have failed all their
accounting-update attempts.
Use undo accounting update-fail to restore the default.
Syntax
accounting update-fail { [ max-times max-times ] offline | online }
undo accounting update-fail
Default
The device does not perform actions on users that have failed all their accounting-update attempts.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
max-times max-times: Specifies the maximum number of consecutive accounting-update failures
allowed by the device for each user. The value range for the max-times argument is 1 to 255, and the
default value is 1.
offline: Logs off users that have failed all their accounting-update attempts.
online: Does not perform actions on users that have failed all their accounting-update attempts.
Examples
# In ISP domain test, configure the device not to perform actions on users that have failed all their
accounting-update attempts.