476
pki abort-certificate-request
Use pki abort-certificate-request to abort the certificate request for a PKI domain.
Syntax
pki abort-certificate-request domain domain-name
Views
System view
Predefined user roles
network-admin
Parameters
domain-name: Specifies a PKI domain by its name, a case-insensitive string of 1 to 31 characters.
The domain name cannot contain the special characters listed in Table 67.
Table 67 Special characters
Tilde ~ Dot .
Asterisk * Left angle bracket <
Backslash \ Right angle bracket >
Vertical bar | Quotation marks "
Colon : Apostrophe '
Usage guidelines
You can abort a certificate request and change some parameters, such as common name, country
code, or FQDN, in the certificate request before the CA issues the certificate. Use the display pki
certificate request-status command to display the certificate request status.
Examples
# Abort the certificate request for PKI domain 1.
<Sysname> system-view
[Sysname] pki abort-certificate-request domain 1
The certificate request is in process.
Confirm to abort it? [Y/N]:y
Related commands
display pki certificate request-status
pki request-certificate domain
pki certificate access-control-policy
Use pki certificate access-control-policy to create a certificate-based access control policy and
enter its view, or enter the view of an existing certificate-based access control policy.
Use undo pki certificate access-control-policy to remove a certificate-based access control
policy.
Syntax
pki certificate access-control-policy policy-name
To Next Page
Loading...
