H3C MSR Series Command Reference

43
Examples
# In ISP domain test, set the DHCPv6 request timeout timer to 90 seconds for PPPoE and L2TP
users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] dhcpv6-follow-ipv6cp timeout 90
Related commands
basic-service-ip-type
display domain
Use display domain to display ISP domain configuration.
Syntax
display domain [ isp-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
isp-name: Specifies an ISP domain by its name, a case-insensitive string of 1 to 255 characters. If
you do not specify an ISP domain, this command displays the configuration of all ISP domains.
Examples
# Display the configuration of all ISP domains.
<Sysname> display domain
Total 2 domains
Domain: system
State: Active
Default authentication scheme: Local
Default authorization scheme: Local
Default accounting scheme: Local
Accounting start failure action: Online
Accounting update failure action: Online
Accounting quota out action: Offline
Service type: HSI
Session time: Exclude idle time
DHCPv6-follow-IPv6CP timeout: 60 seconds
Authorization attributes :
Idle cut: Disabled
IGMP access number: 4
MLD access number: 4
Domain: dm
State: Active

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS