H3C MSR Series Command Reference

183
dot1x smarton switchid
Use dot1x smarton switchid to set a SmartOn switch ID.
Use undo dot1x smarton switchid to restore the default.
Syntax
dot1x smarton switchid switch-string
undo dot1x smarton switchid
Default
No SmartOn switch ID exists.
Views
System view
Predefined user roles
network-admin
Parameters
switch-string: Specifies the SmartOn switch ID, a case-sensitive string of 1 to 30 characters.
Usage guidelines
The device checks the SmartOn switch ID in each received EAP-Response/Notification packet. If the
switch ID is not the same as the switch ID on the device, the device stops the 802.1X authentication
process for the client that sends this packet.
Examples
# Set the SmartOn switch ID to abc.
<Sysname> system-view
[Sysname] dot1x smarton switchid abc
Related commands
display dot1x
dot1x smarton
dot1x smarton password
dot1x smarton timer supp-timeout
Use dot1x smarton timer supp-timeout to set the SmartOn client timeout timer.
Use undo dot1x smarton timer supp-timeout to restore the default.
Syntax
dot1x smarton timer supp-timeout supp-timeout-value
undo dot1x smarton timer supp-timeout
Default
The SmartOn client timeout timer is 30 seconds.
Views
System view
Predefined user roles
network-admin

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS