H3C MSR Series Command Reference

598
Examples
# Configure the local device to always obtain the identity information from the local certificate for
signature authentication.
<Sysname> system-view
[sysname] ike signature-identity from-certificate
Related commands
local-identity
ike identity
inside-vpn
Use inside-vpn to specify an inside VPN instance.
Use undo inside-vpn to restore the default.
Syntax
inside-vpn vpn-instance vpn-instance-name
undo inside-vpn
Default
No inside VPN instance is specified for an IKE profile. The device forwards protected data to the
VPN instance where the interface that receives the data resides.
Views
IKE profile view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the device
forwards protected data. The vpn-instance-name argument represents the VPN instance name, a
case-sensitive string of 1 to 31 characters.
Usage guidelines
This command determines where the device should forward received IPsec protected data. If you
configure this command, the device looks for a route in the specified VPN to forward the data. If you
do not configure this command, the device looks for a route in the VPN instance where the receiving
interface resides to forward the data.
Examples
# Specify the inside VPN instance vpn1 for IKE profile prof1.
<Sysname> system-view
[Sysname] ike profile prof1
[Sysname-ike-profile-prof1] inside-vpn vpn-instance vpn1
keychain
Use keychain to specify an IKE keychain for pre-shared key authentication.
Use undo keychain to remove an IKE keychain.
Syntax
keychain keychain-name

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS