H3C MSR Series Command Reference

595
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command enables the device to output logs for the IKE negotiation process.
This command is available only in non-FIPS mode.
Examples
# Enable logging for IKE negotiation.
<Sysname> system-view
[Sysname] ike logging negotiation enable
ike nat-keepalive
Use ike nat-keepalive to set the NAT keepalive interval.
Use undo ike nat-keepalive to restore the default.
Syntax
ike nat-keepalive seconds
undo ike nat-keepalive
Default
The NAT keepalive interval is 20 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
seconds: Specifies the NAT keepalive interval in seconds, in the range of 5 to 300.
Usage guidelines
This command takes effect only for a device that resides in the private network behind a NAT
gateway. The device behind the NAT gateway needs to send NAT keepalives to its peer to keep the
NAT session alive, so that the peer can access the device.
The NAT keepalive interval must be shorter than the NAT session lifetime. For information about how
to display the lifetime of NAT sessions, see Layer 3–IP Services Command Reference.
Examples
# Set the NAT keepalive interval to 5 seconds.
<Sysname> system-view
[Sysname] ike nat-keepalive 5
ike profile
Use ike profile to create an IKE profile and enter its view, or enter the view of an existing IKE profile.
Use undo ike profile to delete an IKE profile.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS