137
Examples
# In HWTACACS scheme hwt1, set the server quiet timer to 10 minutes.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer quiet 10
Related commands
display hwtacacs scheme
timer realtime-accounting (HWTACACS scheme view)
Use timer realtime-accounting to set the real-time accounting interval.
Use undo timer realtime-accounting to restore the default.
Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
Default
The real-time accounting interval is 12 minutes.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
minutes: Specifies the real-time accounting interval in minutes, in the range of 0 to 60. Setting this
interval to 0 disables the device from sending online user accounting information to the HWTACACS
accounting server.
Usage guidelines
For real-time accounting, a NAS must transmit the accounting information of online users to the
HWTACACS accounting server periodically. This command is used to set the interval.
A short interval helps improve accounting precision but requires many system resources.
Table 11 Recommended real-time accounting intervals
Real-time accounting interval
1 to 99 3 minutes
100 to 499 6 minutes
500 to 999 12 minutes
1000 or more 15 minutes or longer
Examples
# In HWTACACS scheme hwt1, set the real-time accounting interval to 51 minutes.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer realtime-accounting 51
To Next Page
Loading...
