836
Views
NBAR rule view
Predefined user roles
network-admin
Parameters
to-client: Specifies the direction from server to client.
to-server: Specifies the direction from client to server.
Usage guidelines
The following matrix shows the command and hardware compatibility:
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM
-HK/810-W-LM-HK
Yes
MSR810-LMS/810-LUS No
MSR2600-10-X1 Yes
MSR 2630 Yes
MSR3600-28/3600-51 Yes
MSR3600-28-SI/3600-51-SI No
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC Yes
MSR 3610/3620/3620-DP/3640/3660 Yes
MSR5620/5660/5680 Yes
If you execute this command multiple times for the same NBAR rule, the most recent configuration
takes effect.
Examples
# Configure user-defined NBAR rule abcd to match packets from client to server.
<Sysname> system-view
[Sysname] nbar application abcd protocol http
[Sysname-nbar-application-abcd] direction to-server
Related commands
nbar application
disable
Use disable to disable a user-defined NBAR rule.
Use undo disable to restore the default.
Syntax
disable
undo disable
Default
A user-defined NBAR rule is enabled.
To Next Page
Loading...
