H3C MSR Series Command Reference

559
# Display the routing table. You can see a created static route. (Other information is not shown.)
[Sysname] display ip routing-table
...
Destination/Mask Proto Pre Cost NextHop Interface
4.0.0.0/24 Static 60 0 2.2.2.3 GE1/0/1
Related commands
display ip routing-table (Layer 3—IP Routing Command Reference)
ipsec policy
ipsec policy-template
reverse-route preference
Use reverse-route preference to set the preference of the static routes created by IPsec RRI.
Use undo reverse-route preference to restore the default.
Syntax
reverse-route preference number
undo reverse-route preference
Default
The preference for the static routes created by IPsec RRI is 60.
Views
IPsec policy view
IPsec policy template view
Predefined user roles
network-admin
Parameters
number: Specifies a preference value. The value range is 1 to 255. A smaller value represents a
higher preference.
Usage guidelines
When you change this preference in an IPsec policy, the device deletes all IPsec SAs created
according to this IPsec policy, and the associated static routes.
Examples
# Change the preference to 100 for static routes created by IPsec RRI.
<Sysname> system-view
[Sysname] ipsec policy 1 1 isakmp
[Sysname-ipsec-policy-isakmp-1-1] reverse-route preference 100
Related commands
ipsec policy
ipsec policy-template
reverse-route tag
Use reverse-route tag to set a route tag for the static routes created by IPsec RRI.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS