1126
IPv6 uRPF commands
Commands and descriptions for centralized devices apply to the following routers:
• MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM-HK/810-W-LM-HK/810-L
MS/810-LUS.
• MSR2600-10-X1.
• MSR 2630.
• MSR3600-28/3600-51.
• MSR3600-28-SI/3600-51-SI.
• MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC.
• MSR 3610/3620/3620-DP/3640/3660.
Commands and descriptions for distributed devices apply to the following routers:
• MSR5620.
• MSR 5660.
• MSR 5680.
display ipv6 urpf
Use display ipv6 urpf to display IPv6 uRPF configuration.
Syntax
Centralized devices in standalone mode:
display ipv6 urpf [ interface interface-type interface-number ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display ipv6 urpf [ interface interface-type interface-number ] [ slot slot-number ]
Distributed devices in IRF mode:
display ipv6 urpf [ interface interface-type interface-number ] [ chassis chassis-number slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays IPv6 uRPF configuration for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays IPv6 uRPF configuration for all member devices. (Centralized
devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
To Next Page
Loading...
Need help?
General
