H3C MSR Series

922
undo description
Default
A connection limit policy does not have a description.
Views
IPv4 connection limit policy view
IPv6 connection limit policy view
Predefined user roles
network-admin
Parameters
text: Specifies a description, a case-sensitive string of 1 to 127 characters.
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Configure the description as CenterToA for IPv4 connection limit policy 1.
<Sysname> system-view
[Sysname] connection-limit policy 1
[Sysname-connlmt-policy-1] description CenterToA
Related commands
display connection-limit
display connection-limit
Use display connection-limit to display information about connection limit policies.
Syntax
display connection-limit { ipv6-policy | policy } { policy-id | all }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-policy: Specifies an IPv6 connection limit policy.
policy: Specifies an IPv4 connection limit policy.
policy-id: Specifies a connection limit policy by its ID. The value range for this argument is 1 to 32.
all: Specifies all connection limit policies.
Examples
# Display information about all IPv4 connection limit policies.
<Sysname> display connection-limit policy all
3 policies in total:
Policy Rule Stat Type HiThres LoThres Rate ACL
--------------------------------------------------------------------------------