H3C MSR Series

174
Related commands
display dot1x
dot1x handshake
dot1x mandatory-domain
Use dot1x mandatory-domain to specify a mandatory 802.1X authentication domain on a port.
Use undo dot1x mandatory-domain to restore the default.
Syntax
dot1x mandatory-domain domain-name
undo dot1x mandatory-domain
Default
No mandatory 802.1X authentication domain is specified on a port.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
domain-name: Specifies the ISP domain name, a case-insensitive string of 1 to 255 characters.
Usage guidelines
When the system authenticates an 802.1X user trying to access a port, it selects an authentication
domain in the following order:
1. Mandatory domain.
2. ISP domain specified in the username.
3. Default ISP domain.
Examples
# Specify my-domain as the mandatory authentication domain for 802.1X users on GigabitEthernet
1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dot1x mandatory-domain my-domain
Related commands
display dot1x
dot1x max-user
Use dot1x max-user to set the maximum number of concurrent 802.1X users on a port.
Use undo dot1x max-user to restore the default.
Syntax
dot1x max-user max-number
undo dot1x max-user