H3C MSR Series Command Reference

373
Views
System view
Predefined user roles
network-admin
Parameters
server-name: Specifies a portal authentication server by its name, a case-sensitive string of 1 to 32
characters.
Usage guidelines
In portal authentication server view, you can configure the following parameters and features for the
portal authentication server:
• IP address of the server.
• Destination UDP port number used by the device to send unsolicited portal packets to the portal
authentication server.
• MPLS L3VPN where the portal authentication server resides.
• Pre-shared key for communication between the access device and the server.
• Server detection feature.
You can configure multiple portal authentication servers for an access device.
Examples
# Create portal authentication server pts and enter its view.
<Sysname> system-view
[Sysname] portal server pts
[Sysname-portal-server-pts]
Related commands
display portal server
portal temp-pass enable
Use portal temp-pass enable to enable portal temporary pass and set the temporary pass period.
Use undo portal temp-pass enable to disable portal temporary pass.
Syntax
portal temp-pass [ period period-value ] enable
undo portal temp-pass enable
Default
Portal temporary pass is disabled.
Views
Interface view
Service template view
Predefined user roles
network-admin
Parameters
period period-value: Specifies the temporary pass period. The value range for the period-value
argument is 10 to 3600 seconds, and the default is 30 seconds.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS