837
Views
NBAR rule view
Predefined user roles
network-admin
Usage guidelines
The following matrix shows the command and hardware compatibility:
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM
-HK/810-W-LM-HK
Yes
MSR810-LMS/810-LUS No
MSR2600-10-X1 Yes
MSR 2630 Yes
MSR3600-28/3600-51 Yes
MSR3600-28-SI/3600-51-SI No
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC Yes
MSR 3610/3620/3620-DP/3640/3660 Yes
MSR5620/5660/5680 Yes
Use this command to disable a user-defined NBAR rule if the following conditions exist:
• The NBAR rule will not be used in the near future.
• You do not want to delete the NBAR rule.
Examples
# Disable user-defined NBAR rule abcd.
<Sysname> system-view
[Sysname] nbar application abcd protocol http
[Sysname-nbar-application-abcd] disable
Related commands
nbar application
display app-group
Use display app-group to display information about the specified application groups.
Syntax
display app-group [ name group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
To Next Page
Loading...
