H3C MSR Series

838
Parameters
name group-name: Specifies an application group by its name. The group-name argument is a
case-insensitive string of 1 to 63 characters. The names invalid and other are not allowed. If you do
not specify any parameters, this command displays information about all application groups.
Examples
# Display information about all application groups.
<Sysname> display app-group
User-defined count:3
Group Name Type Group ID
6767 User-defined 0x00800002
er User-defined 0x00800001
hbc User-defined 0x00800003
# Display information about application group er.
<Sysname> display app-group name er
Group English name: er
Group Chinese name: er
Group ID: 0x00800001
Type: User-defined
Application count: 2
Include application list:
Application name Type App ID
114Travel Pre-defined 0x0000542c
banc User-defined 0x00800001
pre-defined app-group count:0
Include pre-defined app-group list:
App-group name Type App-group ID
Table 123 Command output
Field
Description
User-defined count Number of application groups.
Group Name Name of the application group.
Group English name English name of the application group.
Type
Application protocol attribute:
• Pre-defined.
• User-defined.
This filed always displays
User-defined
for
application groups.
Application count
Number of application protocols in the application
group.
Include application list Application protocol list.
Application name Application protocol name.
App ID Application protocol ID.