H3C MSR Series Command Reference

48
Use short domain names to ensure that user names containing a domain name do not exceed the
maximum name length required by different types of users.
Examples
# Create an ISP domain named test and enter ISP domain view.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test]
Related commands
display domain
domain default enable
domain if-unknown
state (ISP domain view)
domain default enable
Use domain default enable to specify the default ISP domain. Users without any domain name
included in the usernames are considered in the default domain.
Use undo domain default enable to restore the default.
Syntax
domain default enable isp-name
undo domain default enable
Default
The default ISP domain is the system-defined ISP domain system.
Views
System view
Predefined user roles
network-admin
Parameters
isp-name: Specifies the ISP domain name, a case-insensitive string of 1 to 255 characters. The ISP
domain must already exist.
Usage guidelines
The system has only one default ISP domain.
An ISP domain cannot be deleted when it is the default ISP domain. Before you use the undo
domain command, change the domain to a non-default ISP domain by using the undo domain
default enable command.
Examples
# Create an ISP domain named test, and configure the domain as the default ISP domain.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] quit
[Sysname] domain default enable test
Related commands
display domain

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS