H3C MSR Series Command Reference

599
undo keychain keychain-name
Default
No IKE keychain is specified for pre-shared key authentication.
Views
IKE profile view
Predefined user roles
network-admin
Parameters
keychain-name: Specifies an IKE keychain name, a case-insensitive string of 1 to 63 characters.
Usage guidelines
You can specify a maximum of six IKE keychains for an IKE profile. An IKE keychain specified earlier
has a higher priority.
Examples
# Specify the IKE keychain abc for IKE profile 1.
<Sysname> system-view
[Sysname] ike profile 1
[Sysname-ike-profile-1] keychain abc
Related commands
ike keychain
local-identity
Use local-identity to configure the local ID, the ID that the device uses to identify itself to the peer
during IKE negotiation.
Use undo local-identity to restore the default.
Syntax
local-identity { address { ipv4-address | ipv6 ipv6-address } | dn | fqdn [ fqdn-name ] | user-fqdn
[ user-fqdn-name ] }
undo local-identity
Default
No local ID is configured for an IKE profile. An IKE profile uses the local ID configured in system view
by using the ike identity command. If the local ID is not configured in system view, the IKE profile
uses the IP address of the interface to which the IPsec policy is applied as the local ID.
Views
IKE profile view
Predefined user roles
network-admin
Parameters
address { ipv4-address | ipv6 ipv6-address }: Uses an IPv4 or IPv6 address as the local ID.
dn: Uses the DN in the local certificate as the local ID.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS